Ann Iacobucci
2023-12-29 04:45:27 UTC
Hi all,
i got the same issue than you.
I have an HP 6000 Pro as main Linux PC.
I tried to install Batocera on a HP dc7900. I've burned the img with etcher on USB Stick but not enable to boot on it.
I tested the USB stick on Laptop Lenovo, and old EEpc with success.
I tried to with Lakka & Recalbox and i got the same issue.
I updated the Bios to version 1.27 Rev. A. and the ME Firmware to 2.2.20.1039 Rev. B.
Still the issue, and i got a flashback from my windows years when i was trying to boot an a specifique disque, on windows we need to mark the Partition Bootable.
So in Xubuntu, with gnome-disk-utility i set the partition bootable.
And i tried with the USB Rear panel, seems for me that the USB Front Panel do not work very well.
hi everyone,
i have the same issue ,i buy a dell optiplex 380 intel celeron q9550 quad,4gb ram ,250 gb hdd, i tried to make usb stick with batocera and dont boot,the stick 16gb kingston fa 32 batocera 64 bit dont boot
16gb kingston ntfs batocera 64 bit dont boot
16gb kingston fat32 batocera 32 bit dont boot
64gb kingston fat32 batocera 64 bit dont boot
64gb kingston ntfs batocera 64 bit dont boot
i download batocera with winrar unpack and with balena etcher flash to usb,on the boot menu i tried
usb first boot
usb first boot and all others disabled
i dont find secur boot options only when its start in the left up corner apear "batocera.linux" and then black screen
ps. sorry for my poor english
download balena etcher windows 7 32-bit
DOWNLOAD https://8tiocupasto.blogspot.com/?r=2wYgYq
Some get this error when using the balenaetcher to USB option. I always prefer to burn to a DVD disk to install. Set the speed low when burning to a disk. Fast burn or USB install can both throw errors with the medium or the input output.
Download balenaEtcher 1.18.9 free full version latest one-click standalone offline setup for Windows 32-bit and 64-bit. Etcher 2022 by balena is a comprehensive application for flashing the OS images to the SD cards and removable storage drives.
I am having similar issues. Here is what I found.
Running the usb (created with balena-etcher) on a system with empty ssd, rescuezilla starts and works as expected. Using it on a system to create a back-up copy, the system do not see the data and hence boot from the internal SSD. I tried to plug usb on usb3 and usb2 but nothing changes.
I tried to reflash the usb (again with balena-etcher) but i get similar results.
Now I am stuck and unable to backup our system :)
We only use ubuntu 20.04 if it makes any difference.
I even tried to force booting from usb but it's like the usb is empty.
Trying same usb on an wiped out machine appears to work (it boots correctly)
Very strange as for the first day the usb worked correctly (from memory I had it in the usb3 port)
Also, strange that the system reports Low Battery when the machine is not a portable?
Anyway, hope i find a solution as it's much faster solution than clonezilla
35fe9a5643
i got the same issue than you.
I have an HP 6000 Pro as main Linux PC.
I tried to install Batocera on a HP dc7900. I've burned the img with etcher on USB Stick but not enable to boot on it.
I tested the USB stick on Laptop Lenovo, and old EEpc with success.
I tried to with Lakka & Recalbox and i got the same issue.
I updated the Bios to version 1.27 Rev. A. and the ME Firmware to 2.2.20.1039 Rev. B.
Still the issue, and i got a flashback from my windows years when i was trying to boot an a specifique disque, on windows we need to mark the Partition Bootable.
So in Xubuntu, with gnome-disk-utility i set the partition bootable.
And i tried with the USB Rear panel, seems for me that the USB Front Panel do not work very well.
hi everyone,
i have the same issue ,i buy a dell optiplex 380 intel celeron q9550 quad,4gb ram ,250 gb hdd, i tried to make usb stick with batocera and dont boot,the stick 16gb kingston fa 32 batocera 64 bit dont boot
16gb kingston ntfs batocera 64 bit dont boot
16gb kingston fat32 batocera 32 bit dont boot
64gb kingston fat32 batocera 64 bit dont boot
64gb kingston ntfs batocera 64 bit dont boot
i download batocera with winrar unpack and with balena etcher flash to usb,on the boot menu i tried
usb first boot
usb first boot and all others disabled
i dont find secur boot options only when its start in the left up corner apear "batocera.linux" and then black screen
ps. sorry for my poor english
download balena etcher windows 7 32-bit
DOWNLOAD https://8tiocupasto.blogspot.com/?r=2wYgYq
Some get this error when using the balenaetcher to USB option. I always prefer to burn to a DVD disk to install. Set the speed low when burning to a disk. Fast burn or USB install can both throw errors with the medium or the input output.
Download balenaEtcher 1.18.9 free full version latest one-click standalone offline setup for Windows 32-bit and 64-bit. Etcher 2022 by balena is a comprehensive application for flashing the OS images to the SD cards and removable storage drives.
I am having similar issues. Here is what I found.
Running the usb (created with balena-etcher) on a system with empty ssd, rescuezilla starts and works as expected. Using it on a system to create a back-up copy, the system do not see the data and hence boot from the internal SSD. I tried to plug usb on usb3 and usb2 but nothing changes.
I tried to reflash the usb (again with balena-etcher) but i get similar results.
Now I am stuck and unable to backup our system :)
We only use ubuntu 20.04 if it makes any difference.
I even tried to force booting from usb but it's like the usb is empty.
Trying same usb on an wiped out machine appears to work (it boots correctly)
Very strange as for the first day the usb worked correctly (from memory I had it in the usb3 port)
Also, strange that the system reports Low Battery when the machine is not a portable?
Anyway, hope i find a solution as it's much faster solution than clonezilla
35fe9a5643